<

                                     

 

HOME
REAR WHEEL REMOVAL

 

Loosen the shocks and jack up the bike a little bit up so the shocks can be removed

     Lower your bike until the rear axle have good clearance over the exhaust system.
     Loosen the nut on the rear axle.
     Loosen the caliper bracket pin bolt and pull off the caliper bracket.
     Then pull out the rear axle.

 

 

LIFT THE BIKE AND THE WHEEL IS OFF

LOOSEN THE GEAR CASE NUTS BEFORE TORQUE THE REAR AXLE NUT

USE A TORQUE WRENCH WHEN ASSEMBLE

Download the torque table here (.pdf)

REAR WHEEL MOUNTING TORQUE VALUES 

ITEM

QTY

THREAD (mm)

TORQUE

Rear axle nut

1

18

110 N.m

81 Lbf.Ft

Final gear case mounting nut

4

10

64 N.m

47 Lbf.Ft

Shock absorber upper mounting bolt

2

8

26 N.m

20 Lbf.Ft

Left shock absorber lower mounting bolt

1

10

34 N.m

25 Lbf.Ft

Right shock absorber lower mounting bolt

1

8

23 N.m

17 Lbf.Ft

Rear caliper bracket pin bolt

1

8

Apply a locking agent to the threads.

13 N.m

9 Lbf.Ft